FUJICA AX-3 Owner'S Manual Download

Page: 17 / 39

2. Your subject is in sharp focus when it appears sharp and clear. This

method is recommended for focusing the lens quickly and for copying work.

Estimate the distance from camera to subject with your eye and set the
Distance Ring to that distance (white numbers= meters, green numbers=

feet).

Focusing by Eye Estimation

This method is best for taking quick snapshots. However, if you are using
a large aperture or are taking close-ups, or if you are shooting with a

telephoto lens, be sure to focus the lens precisely.

5. REWINDING THE FILM

After exposing a roll of film, wind it back into its cartridge and take it
to your photo finisher as soon as possible.

* If you are at the end of a roll and the Film Advance Lever feels tight
as you are winding it, do not force it. Just return it to its normal

position and rewind the film into its cartridge.

1. Press in the Rewind Button (provided on the camera top.)

Note: Before pressing in the Rewind Button, pull out the Film Advance
Lever by a stand-off angle of the lever, or the Rewind Button may
disengage and the film may not be rewound.

Summary of Contents for AX-3








































Search results

Summary of Contents for AX-3

Reviews:

Related manuals for AX-3

Brands by name

Popular brands

FUJICA AX-3, Owner'S Manual

Search results

Summary of Contents for AX-3

Reviews:

Related manuals for AX-3

Brands by name

Popular brands