Fuji Xerox DocuPrint M218 fw, User Manual, Page: 204 / 468

203 Copying
Setting Copy Options
Set the following options for the current copy job before pressing the ( Start ) button to make
copies.
NOTE:
• After a copy job is completed, the copy options would be kept until the screen returns to
Select Function
(auto-reset or the Back button is pressed), the ( Clear All ) button is pressed, or the Copy button is pressed
again.
This section includes:
• "Number of Copies" on page 204
• "Document Size" on page 205
• "Output Paper Size" on page 206
• "Reduce/Enlarge" on page 208
• "Collated" on page 210
• "Document Type" on page 211
• "Lighten/Darken" on page 212
• "Sharpness" on page 213
• "Auto Exposure" on page 214
• "Multiple Up" on page 215
• "Margin Top/Bottom" on page 217
• "Margin Left/Right" on page 218
• "Margin Middle" on page 219