Fuji Xerox DocuPrint M218 fw, User Manual

Page: 219 / 468

Copying 218

Margin Left/Right
You can specify the left and right margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Copy button.
3
Select
Margin Left/Right
, and then press the button.
4
Press the or button or enter the desired value using the numeric keypad, and then press
the
button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 203
6
Press the ( Start ) button to begin copying.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch