Fuji Xerox DocuPrint M218 fw, User Manual

Page: 213 / 468

Copying 212

Lighten/Darken
You can adjust the copy density level to make the copy lighter or darker than the original.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Copy button.
3
Select
Lighten/Darken
, and then press the button.
4
Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 203
6
Press the ( Start ) button to begin copying.
Lighten2 Makes the copy lighter than the original. Works well with dark print.
Lighten1
Normal*
Works well with standard type or printed documents.
Darken1 Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Darken2