Fuji Xerox DocuPrint CP105 b User Manual Download Page 122

Page: 122 / 185

121

Troubleshooting

Basic Printer Problems

Some printer problems can be easy to resolve. If a problem occurs with your printer, check each of the
following:

•

The power cord is connected to the printer, and to a properly grounded electrical outlet.

•

The printer is turned on.

•

The electrical outlet is not turned off at any switch or breaker.

•

Other electrical equipment plugged into the outlet is working.

If you have checked all of the above and still have a problem, turn off the printer, wait for 10 seconds,
and then turn on the printer. This often fixes the problem.

Summary of Contents for DocuPrint CP105 b


























































































































































































Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands

Fuji Xerox DocuPrint CP105 b, User Manual

Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands