Fuji Xerox DocuPrint CP105 b Page 119 User Manual Download

Page: 119 / 185

Troubleshooting

118

Clearing Paper Jams From the Center Output Tray

IMPORTANT:

•

To prevent electric shock, always turn off the printer and disconnect the power cord from the grounded outlet
before performing maintenance.

•

To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely hot
during use.

NOTE:

•

To resolve the error displayed on the operator panel, you must clear all print media from the print media path.

Push the rear cover handle and open the rear door.

Lift up the levers.

Remove any paper jammed from the back of the printer. If no paper is found in the paper path,
then remove any paper jammed out of the center output tray.

Summary of Contents for DocuPrint CP105 b


























































































































































































Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands

Fuji Xerox DocuPrint CP105 b, User Manual

Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands