Fuji Xerox Document Centre C250 User Manual Download Page 531

Page: 531 / 556

Simple Procedures

529

Ap
pendix

Simple Procedures

This section lists procedures the subject of frequently asked questions, particularly in
relation to the system settings.

Press the buttons in the sequence indicated by arrows.

Note

•

The default UserID setting is "11111."

Fax Settings

Changing the Name (Company Name, etc.) Shown to the Fax Recipient

UserID input

[System Settings]

[Fax Mode Settings]

[Local Terminal Information]

[Local Name]

For more information, refer to "Local Name" (P.310).

Changing the Name (the Company Name etc.) Which is Printed at the
Transmission

UserID input

[System Settings]

[Fax Mode Settings]

[Local Terminal Information]

[Company Logo]

For more information, refer to "Send Header" (P.303).

Not Showing the Name (the Company Name etc.) at the Transmission

UserID input

[System Settings]

[Fax Mode Settings]

[Fax Defaults]

[Send Header]

[Off]

For more information, refer to "Send Header" (P.303).

Changing the Dialing Method (Tone-Dialing Circuit/Pulse-Dialing Circuit)

UserID input

[System Settings]

[Fax Mode Settings]

[Local Terminal Information]

[G3 Dial Type]

For more information, refer to "G3 Dial Type" (P.310).

Changing the Circuit Type (External/Internal Line)

UserID input

[System Settings]

[Fax Mode Settings]

[Local Terminal Information]

[G3 Line Type]

For more information, refer to "G3 Line Type" (P.310).

Storing Address Numbers

UserID input

[System Settings]

[Setup Menu]

[Address Book]

* If [Setup Menu] appears in the menu screen: [Setup Menu]

[Address Book]

For more information, refer to "Address Book" (P.334).

Printing an Activity Report to Check the Transmission Results

[Billing Meter/Print Report]

[Print Report/List]

[Job Status/Activity Report]

[Activity Report]

* If [Activity Report] appears in the menu screen: [Activity Report]

[Activity Report]

For more information, refer to "Activity Report" (P.376).

Summary of Contents for Document Centre C250












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Document Centre C250

Reviews:

Related manuals for Document Centre C250

Brands by name

Popular brands

Fuji Xerox Document Centre C250, User Manual

Search results

Summary of Contents for Document Centre C250

Reviews:

Related manuals for Document Centre C250

Brands by name

Popular brands