Fuji Xerox Document Centre C250, User Manual

Page: 312 / 556

11 Setups
310
Setu
ps
11
1
Select [Local Terminal
Information].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Set the items.
4
Select [Save].
For information about entering text, refer to "Entering Text" (P.252).
Local Name
Save the name of the local terminal as the local name.
The local name is shown in the other party's [Activity Report]. However, depending on
the other party's device, it may not be shown.
Using the displayed keyboard and the numeric keypad, make the specification with not
more than 20 characters.
Company Logo
Save the sender name. The sender name is the name of the local terminal as printed
in the send headers and on cover notes.
Using the displayed keyboard and the numeric keypad, make the specification with not
more than 30 characters.
Machine Password
Set the receiving password when you want to limit the other parties that can send faxes.
When the receiving password is set, only a party that sends the correct receiving
password by F code is allowed to send or poll. Note that this means that faxes cannot
be accepted from a fax without the F code feature.
G3 Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the
local terminal fax number.
Using the displayed keyboard and the numeric keypad, specify this is not more than 20
digits.
Note • A G3 ID (fax number) consists of not more than 20 digits, including 0 to 9, +, and space.
G3 Dial Type
You can set the dial type.
„
Tone
Tone dialing line.
„
10pps
Pulse dialing line.
G3 Line Type
You can set the line type.