Fuji Xerox Document Centre C250, User Manual

Page: 501 / 556

Specifications
499
Ap
pendix
17
„
Internet Fax Feature Specifications
„
Document Feeder Specifications
„
Finisher B Specifications
„
Side Output Tray Specifications
Transmitted original size A3, B4, A4
Scanning density Same as fax feature
Output format Format : TIFF-FX
Compression : MH, MMR, JBIG
Profiles TIFF-S, TIFF-F, TIFF-J
Supported protocols Sending: SMTP, receiving: SMTP, POP3
Original size A5, A5 , B5 , B5, A4, A4 , B4, A3, 8.5 × 11", 8.5 × 11" ,
11 × 17"
Original types 38 - 128 g/m
2
(2 sided: 50 - 128 g/m
2
)
Number of originals held 75 sheets
Important • When using Xerox P paper
Original changing speed <Document Centre C450>
Monochrome: 45 sheets/minute (A4
1 sided)
Color: 35 sheets/minute (A4 1 sided)
<Document Centre C360>
Monochrome: 36 sheets/minute (A4
1 sided)
Color : 26 sheets/minute (A4 1 sided)
<Document Centre C250>
Monochrome: 25 sheets/minute (A4
1 sided)
Color : 21 sheets/minute (A4 1 sided)
Power supply Supplied from main unit
Dimensions Width 560 × Depth 510 × Height 120 mm
Weight 12 kg
Tray type Finisher tray x 1: soft (offset available)/stack (offset available)
Paper size/supported
papers Maximum: A3, minimum: B5
64 - 128 g/m
2
Output tray capacity A4: 1,000 pages, B4 or larger: 500 pages, mix stack*: 300 pages
* When larger size papers are loaded on smaller size papers.
Important • The above figures are for using Xerox P papers.
Staple Maximum staple pages : maximum A3, minimum: B5
Staple paper size :
50 pages (64 g/m
2
or less)
Staple position : 1 place (front, top, at an angle),
2 places (parallel)
Important • The above figures are for using Xerox P papers.
Dimensions/weight Width 571.0 × depth 585.0 × height 1,042.0 mm, 35 kg
Floor space when
connected to the main
body Width 1,504.0 × depth 780.6 mm (main body + finisher B)
Paper size Same as main unit