General Settings
63
Cop
y
General Settings
You can set the basic features on the [General Settings] screen. The following shows
the reference section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies)................................................................ 63
Paper Supply (Selecting the Paper for Copying) ....................................................................... 66
Output Color (Selecting the Color to Copy) .............................................................................. 69
Original Type (Selecting the Document Type) .......................................................................... 73
Copy Output (Outputting by Specifying Finishing)................................................................... 73
Multiple-Up (Copying Multiple Sheets onto One Sheet)........................................................... 73
Lighten/Darken (Adjusting the Copy Density) .......................................................................... 73
1
On the [All Services] screen, select
[Copy].
2
Select features on the [General
Settings] screen that appears first.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
You can select a ratio from preset standard copy ratios. You can also enter a ratio
directly.
1
Select a copy ratio, or specify a
value.
Entering the Ratio
Touch the window displaying a
value, and then use the numeric
keypad or the [ ] and [ ] buttons
to specify a ratio within the range of
25 to 400% in 1% increments.
100%
Copies are made at the same size as the original document.
Auto%
The copy ratio is automatically set based upon the document and paper sizes, and the
document is copied to fit in the selected paper.
Note
•
If you select [Auto%], specify a value other than [Auto] for [Paper Supply].
