General Settings
69
Cop
y
Output Color (Selecting the Color to Copy)
You can set the output color to use when copying.
Note
•
If output color restrictions have been set, there are restrictions on which colors are available
for copying. For information about output color restrictions, refer to "Account Limit" (P.254).
1
Select the color to use from [Output
Color]
Auto Detect
The machine automatically
determines the color of the original
document and makes copies in full
color if the original document is
color and in a single color (black) if
the document is black-and-white.
Note
•
The machine may make copies in black and white in the case of the following documents. In
this case change the level at which the machine distinguishes documents (5 levels) in
reference to "Output Color Recognition" (P.211).
- Colored area is very small
- In light color
Color
Copies are made in full color using all the four colors of toner: yellow, magenta, cyan,
and black.
Black
The machine makes copies in black and white regardless of the colors in the original
document.
Dual Color (Red/Black)
The machine makes copies of color documents in two preset colors.
You can change the colors to display. For information about the setting procedures, refer to "Dual Color
- Target Area Color" (P.226) and "Dual Color - Non-target Area Color" (P.227).
Single Color (Red)
The [Output Color - Color] screen is displayed.
Refer to "[Output Color - Color] Screen" (P.72).
[More...]
Display the [Output Color] screen.
