8 System Settings
184
S
yst
em S
et
tin
g
s
System Settings Procedure
To make or change the system settings, it is necessary to be in the System
Administration mode.
This section describes the basic procedures for system settings. The following shows
the reference section for each procedure.
Step 1 Entering System Administration Mode .........................................................................184
Step 2 Entering the System Administrator UserID and Passcode ............................................184
Step 3 Selecting the Operation Mode from the System Administrator Menu ..........................185
Step 4 Selecting an Item from the [System Settings] Screen....................................................185
Step 5 Setting the Feature .........................................................................................................186
Step 6 Exiting System Administration Mode ...........................................................................186
Step 1 Entering System Administration Mode
1
Press the <Log In/Out> button.
Step 2 Entering the System Administrator UserID and Passcode
To enter System Administration mode, enter the system administrator UserID. If you
are using the authentication feature, a Passcode may be required.
It is recommended to change the system administrator UserID and Passcode immediately after installing
the machine. For more information, refer to "System Administrator Settings" (P.249).
1
Enter the UserID with the numeric
keypad or a keyboard displayed by
selecting [Keyboard], and select
[Confirm].
Note
•
The default UserID value is
“11111”. When using the
Authentication feature, a
Passcode is required. The
default Passcode value is “x-
admin”.
<Log In/Out>
button