Fuji Xerox DocuColor 5065II User Manual Download Page 188

Page: 188 / 416

8 System Settings

186

yst
em S

tin

Network Controller Settings

You can set the IP adress, and so on.

For the items in the Print Settings, refer to "Network Controller Settings" (P.247).

Setup Menu

You can change Paper Tray Attributes.

For information, refer to "Paper Tray Attributes" (P.203).

System Administrator Settings

You can set the system administrator ID and system administrator Passcode for

entering System Administration mode.

For information, refer to "System Administrator Settings" (P.249).

Login Setup/Auditron Administration

You can set restrictions on users using feature of the machine, or set restrictions on

individual users.

For information, refer to "Login Setup/Auditron Administration" (P.252).

Step 5 Setting the Feature

Set any feature.

After setting the feature, select [Save].

Step 6 Exiting System Administration Mode

When the settings are completed,
select [Close] until the [System
Settings] screen appears.

Select [Exit].

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands