Fuji Xerox DocuColor 5065II User Manual Download Page 249

Page: 249 / 416

Network Controller Settings

247

yst
em S

tin

Network Controller Settings

In [Network Settings], set the type of interface through which the machine is connected

to the client in TCP/IP, and the parameters required for communications.
The following shows the reference section for each item.

Network Settings

Set the parameters required for communications.

Select [Network Settings].

Select the item to be set or
changed, and select [Change
Settings].

Note

•

Select [ ] to return to the
previous screen or [ ] to
move to the next screen.

Select the setting value.

Select [Save].

Ethernet Setting

Set the Ethernet Setting for the machine. Select [Auto] if your network environment is

mixed or if you do not know the network speed. If you know the speed of the network

to which the machine is attached, select it. If your network is 1000Base-T, select [Auto].

TCP/IP - Get IP Address

Select the procedure for setting the IP address on the machine.
Select one of the following settings.

DHCP

The IP adress, Subnet Mask, and Gateway address are automatically extracted from

the DHCP server.

BOOTP

The IP adress, Subnet Mask, and Gateway address are automatically extracted from

the BOOTP server.

Manual

Enables you to manually enter the IP address, Subnet Mask, and Gateway address.

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands