
Fuji Xerox C2265/C2263
Security Target
- 21 -
Copyright
2016 by Fuji Xerox Co., Ltd
Title: 2600.2-DSR, SFR Package for Hardcopy Device Document Storage and Retrieval (DSR)
Functions, Operational Environment B
Package Version: 1.0
Title: 2600.2-SMI, SFR Package for Hardcopy Device Shared-medium Interface Functions,
Operational Environment B
Package Version: 1.0
2.2.3.
Conformance Rationale
This ST is written with the functions partially added, covering the following written in IEEE Std.
2600.2
TM
-2009: Common HCD Functions, Print Functions, Scan Functions, Copy Functions, Fax
Functions, Document Storage and Retrieval Functions, and Shared-medium Interfaces
Functions.
The type of TOE in this ST is the MFD (Multi Function Device) with copy, print, scan, and fax
functions, and is the same term as Hardcopy Device written in 4.1 Typical Products of PP,
incorporating the required functions.
Also, as shown below, the Security Problem Definition, Security Objectives, and Security
Functional Requirements are written covering the PP.
P.CIPHER is added for OSP for the TOE in addition to Threats / OSP / Assumptions required
in PP. P.CIPHER is the data encryption of the internal HDD, and is independent from other
Problem Definition, causing no impact.
Threats to user data are also added.
There is no change in Assumptions. Therefore, the Threats / OSP / Assumptions are more
restrictive than the statement of the Security Problem Definition of PP.
Security Objectives are set by excluding OE.AUDIT_STORAGE.PROTECTED and
OE.AUDIT_ACCESS.AUTHORIZED from the Security Objectives for the environment
specified in PP. As other contents are quoted without any changes and there is no
additional objective, the Security Objectives for the environment have the restrictions
equivalent to or less than that in the statement of Security Objectives of PP.
O.AUDIT_STORAGE.PROTECTED and O.AUDIT_ACCESS.AUTHORIZED are added for the
Security Objectives for the TOE in addition to the Security Objectives required in PP.
The Security Objectives for the TOE are more restrictive than the statement in the Security
Objectives of PP.
The relation between the SFR specified by PP and that used by ST is shown in Table 14.