Fuji Xerox C2265/C2263
Security Target
- 117 -
Copyright
2016 by Fuji Xerox Co., Ltd
user client, the print data are temporarily stored in Private Print area according to the user
ID.
To refer to the stored print data, a user needs to enter his/her ID and password from the
control panel. When the user is authenticated, the data on the waiting list corresponding to
the user ID are displayed. The user can request printing or deletion of the data on the list.
Mail Box Function
The scanned data and received fax data can be stored into Mailbox from IIT and Fax board
which are not shown in Figure 3.
To store the scanned data into Mailbox, a user needs to enter his/her ID and password from
the MFD control panel. When the user is authenticated, the document data can be scanned
from IIT and stored into the internal HDD according to the user’s instruction from the
control panel.
To store the received fax data into Mailbox, user authentication is not required. Among the
received fax data transmitted from remote destination over public telephone line, the
received fax data whose corresponding Mailbox is specified by the sender is automatically
stored in each corresponding Mailbox. Also, all the received fax data can be distributed and
stored in Mailbox according to over which line the data are transmitted.
To refer to, retrieve, print, or delete the stored data in the Personal Mailbox corresponding to
each registered user ID, user authentication is required; the MFD compares the user ID and
password preset in the MFD against those entered by a general user from the control panel,
CWIS.
7.1.4.
System Administrator’s Security Management (TSF_FMT)
To grant a privilege to a specific user, this function allows only the authorized system
administrator to access the system administrator mode which enables him/her to refer to and
configure the settings of the following TOE security functions from the control panel or system
administrator client.
(1)
FMT_MOF.1 Management of security functions behaviour
FMT_MTD.1(a), FMT_MTD.1(b) Management of TSF data
FMT_SMF.1 Specification of Management Functions
The TOE provides a user interface which allows only the authenticated system administrator
to refer to / change the TOE setting data related to the following TOE security functions and
to make setting whether to enable/disable each function.
With these functions, the required security management functions are provided.
The settings of the following TOE security functions can be referred to and changed from the
control panel.
