Fuji Xerox DocuCentre S2220 User Manual Download Page 184

Page: 184 / 311

9 Tools

184

Tools

Wired Network

Used to make network environment settings.

Note

•

This function does not display unless the Network Kit is installed.

For information on how to display the [Wired Network] screen, refer to "System Settings Procedure" (P.162).

Ethernet

Used to set the Ethernet type to use.

Speed

You can select [Auto], [10BASE-T Half], [10BASE-T Full], [100BASE-TX Half], or [100BASE-TX
Full].

[Auto] is set at the time of factory shipment.

MAC Address

Displays the MAC Address. Not supported by the machine.

TCP/IP

Sets TCP/IP.

Note

•

This setting is activated after restarting the machine.

IP Mode

Sets the TCP/IP operation mode.

[IPv4] is set at the time of factory shipment.

Dual Stack

Select this setting when using the machine in an environment using both IPv4 and IPv6.

IPv4

Select this setting when using the machine in an IPv4 environment.

IPv6

Select this setting when using the machine in an IPv6 environment.

IPv4

Sets IPv4.

Get IP Address

Sets the method used to acquire the IP address, subnet mask, and gateway address.

DHCP

Automatically acquires the IP address, subnet mask, and gateway address from the DHCP
server.

BOOTP

Automatically acquires the IP address, subnet mask, and gateway address from the
BOOTP server.

Summary of Contents for DocuCentre S2220























































































































































































































































































































Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands

Fuji Xerox DocuCentre S2220, User Manual

Search results

Summary of Contents for DocuCentre S2220

Reviews:

Related manuals for DocuCentre S2220

Brands by name

Popular brands