Fuji Xerox DocuCentre S2110 User Manual Download Page 91

Page: 91 / 229

Advanced Copy Settings

Co
py

Advanced Copy Settings

This section describes all the settings you can set for the copy feature.

* : For the features with "*", you can change the settings in the System Administration mode.

Note

You can change the default value of some setting items.

Reference

For more information on changing the settings, refer to "System Administrator Program List" (P.125).

2 Sided

You can set to scan a 1 Sided or 2 Sided or copy on one or both sides of paper.

Press the <2 Sided> button to select the desired copy method.

1 Sided

Copies 1 Sided document on one side of paper, same appearance as the documents.

Setting Item

Description

See

Page:

2 Sided

Used to select 1 Sided or 2 Sided copying.

(P.91)

Pages per Side

Used to copy multiple documents on a single
page.

(P.93)

Collated

Sets the output method to use when making
multiple sets of copies.

(P.94)

Original Type

Sets the document type.

(P.95)

Lighten/Darken

Adjusts the copy density.

(P.96)

ID Card Copy

Used to copy ID cards.

(P.98)

Reduce/Enlarge

Sets a reduction or enlargement factor.

(P.97)

Original Size

Sets the document size.

(P.102)

Paper Supply

Sets the tray to use.

(P.103)

Sharpness*

Adjusts the sharpness.

(P.104)

Background Suppression*

Removes the document's background
suppression.

(P.104)

Edge Erase*

Adjusts the level of edge erase.

(P.104)

Auto Rotation

Rotates the scanned data when copying.

(P.104)

<2 Sided> button

Summary of Contents for DocuCentre S2110





































































































































































































































Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands

Fuji Xerox DocuCentre S2110, User Manual

Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands