Fuji Xerox DocuCentre-IV C2263, User Manual

Page: 407 / 443

Print
407
Com
p
ut
er Op
era
tio
ns
11
Print
This section describes how to print with the machine by operating on a computer.
Print Features
The main print features of the machine are as follows:
Printing Using a Print Driver
For more information on print features, click [Help] on the print driver screen to view the print driver's help. For information
on printing, refer to "Printing" (P.409).
Note • Some features become available after you make option settings on the [Options] tab. The
unavailable features are grayed out.
„
Pages Per Sheet (N-UP)
Prints multiple pages onto one sheet of paper.
„
2-Sided Print
Prints data on both sides of paper.
„
Poster
Splits one page of print data into multiple sheets of paper and enlarges the printed image
to fit the size of each sheet. Used to create large posters.
„
Booklet Creation
Performs 2-sided printing and page allocation for printing a booklet in the correct page
order.
„
Watermark
Prints preset text, such as "Confidential", over the print data.
„
Secure Print
Temporarily stores the print data on the machine, to print it with the print command from
the machine. This feature allows you to set a passcode, which is helpful to print confidential
documents.
For information on how to print a Secure Print job, refer to "Secure Print" (P.390).
„
Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information on how to print a Sample Set job, refer to "Sample Set" (P.392).
„
Delayed Print
Temporarily stores the print data on the machine to print it at specified time.
For information on how to print a Delayed Print job, refer to "Delayed Print" (P.394).
„
Store in Remote Folder
Temporarily stores the print data in a registered folder, to print the data with the print
command from the machine.
Important • The print result of the Store in Remote Folder feature may be inferior to the other print results in
quality.