Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 464 / 603

16 Problem Solving
462
Problem Solving
16
Unable to Send a Scanned Document over the Network (FTP/SMB)
Follow the procedure below if you cannot send a scanned document over the network.
No
Cause The Salutation port is not enabled on the machine.
Action Enable the Salutation port.
Refer to the Network Administrator Guide for details.
Cause The network between the computer and machine is abnormal.
Action Check with your network administrator.
Unable to open a mailbox. Cause The mailbox is unregistered.
No Action Register the mailbox.
Refer to "Mailbox" (P.328).
Cause The mailbox password has been forgotten.
Action The password cannot be verified. Ask the system administrator
for setting the password to [Off], and then setting the password
again.
Refer to "Mailbox" (P.328).
Unable to import data from
the scanner due to a
TWAIN transmission error. Cause The scan driver is not installed.
No Action Install the scan driver.
Operation halts during
scanning. Cause The file size is too large.
Action Lower the resolution or set the output file format with high
compression ratio, and import again.
Refer to "File Format (Selecting the Format of Scanned Data)"
(P.178) or "Image Compression (Specifying an Image Compression
Ratio When Scanning)" (P.192).
Unable to send data over
the network. Cause The server is not correctly specified.
Action Correctly specify the server.
Cause The save destination is not correctly specified.
Action Correctly specify the save destination.
Cause When using SMB, the shared name is not correctly specified.
Action Correctly specify the shared name.
Cause When using SMB (UNC Format), the save destination is not
correctly specified.
Action Correctly specify the save destination.
Cause The login name is not entered correctly.
Action Correctly enter the login name.