Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 129 / 603

Transmission Options
127
Fa
x
4
Important • If a power failure occurs or the power is turned off when the Delayed Start feature is set, the
setting is cleared and transmission begins as soon as the power is turned on.
Note • You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delayed Start] separately for each address number. For information on how to
register address numbers, refer to "Address Book (Address Number)" (P.336).
• If address number or group dial numbers are dialed with the Broadcast Send feature, the
Delayed Start setting specified for each address number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is
busy, it will be sent as soon as the line becomes available.
• The default value of [Start Time] can be changed in the System Administration mode. For
more information, refer to "Delayed Start - Start Time" (P.314).
1
Select [Priority Send / Delayed
Start] on the [Transmission
Options] screen.
2
Select [On] of [Priority Send] to set
Priority Send, and select [On] of
[Delayed Start] to set Delayed
Start.
„ Priority Send
z
Off
Priority Send is not applied.
z
On
Priority Send is applied.
„ Delayed Start
z
Off
Delayed Start is not applied.
z
On
Delayed Start is applied.
„ Start Time
Displays the [Delayed Start - Start Time] screen.
Refer to "[Delayed Start - Start Time] Screen" (P.127).
[Delayed Start - Start Time] Screen
Specify the start time.
1
Select [AM] or [PM].
2
Enter [Hours] and [Minutes].
Important • If you press the <Start> button
after the specified time
elapses, the stored document
will be sent at the specified
time the next day.
Send Header (Adding Sender Name and Phone Number to Faxes)
The Send Header feature adds the start time, sender name, recipient name, G3 ID, and
number of pages to the transmitted document.