Fuji Xerox DocuCentre 1055, User Manual

Page: 70 / 245

4 Fax
70
1.
Press the <Speed Dial> button on the
control panel.
2.
Enter a 3-digit code.
NOTE: If the 3-digit code entered is correct, the destination is displayed. If it is
incorrect, you are prompted to re-enter a 3-digit code.
One Touch Dial
This feature allows you to select preset Speed Dial codes 001-036 or Fax Programs
p01- p18 using One Touch buttons. One Touch Dial consists of the following three
pages and you can change the page using the flip cards.
• Page 1 displays Speed Dial codes 001–018.
• Page 2 displays Speed Dial codes 019–036.
• Page 3 displays Fax Programs p01–p18.
NOTE: You can assign any Speed Dial codes between 037 and 200 to Fax Program
p01-p18. This allows you to register a maximum of 54 Speed Dial codes in One Touch
Dial.
Fax Program
Fax Program is a dialing method of programming a fax destination and fax-sending
operations to allocate one key. You can always send faxes with the same settings by
recalling the program using One Touch Dial. Items such as serial broadcast
transmission, timer transmission, and Multiple-up transmission can all be registered in
advance, and the operation is then as simple as touching a single key. It is an effective
way to save time. Up to 30 Fax Programs can be registered using 3-digit codes. When
you register Fax Programs p01–p18, their codes are automatically assigned to One
Touch buttons on the control panel. For more information on how to register Fax
Programs, refer to
Fax Program in the Setups chapter on page 168.
1.
If necessary, flip One Touch panels to
access the required One Touch button.
2.
Press the One Touch button.
Relay Broadcast
This feature allows you to send a document to a remote machine, which then sends the
document to multiple destinations registered in the remote machine for Speed Dial.
<Speed Dial> button
One Touch buttons