Fuji Xerox ApeosPort-IV C4430, User Manual

Page: 306 / 393

7 Job Flow Sheets (ApeosPort Series Models Only)
306
Job Flow
S
h
ee
ts
(Ape
os
P
o
rt Se
rie
s
M
ode
ls
7
Job Flow Procedure
Job flow sheets are categorized into two types according to the target. One type of job
flow sheets targets scanned documents, and the other type targets files stored in
folders. This section describes the first type of job flow sheets, targeting scanned
documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job
Flow" (P.299).
The following describes the procedure to operate a job flow. Refer to the following
section for each procedure.
To create and register a job flow sheet, use a computer.
Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................306
Step 2 Selecting a Job Flow Sheet ............................................................................................307
Step 3 Confirming/Changing the Job Flow Sheet.....................................................................307
Step 4 Starting the Job Flow Sheet ...........................................................................................307
Note • To create a job flow sheet, use CentreWare EasyOperator or Device Setup Tool.
EasyOperator is included in the Driver CD Kit provided with the machine. You can download
Device Setup Tool from Fuji Xerox website.
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
1
Press the <Services Home> button.
2
Select [Job Flow Sheets].
<Services Home> button