3 Maintenance
70
M
ai
n
te
na
nc
e
3
3
After you take out the staple cartridge, check
inside of the finisher for any remaining
staples.
4
Pinch both sides of the empty staple case
with your fingers (1), and remove the staple
case from the cartridge (2).
5
Insert the front side of the new staple case
into the staple cartridge (1), and then push
the rear side into the cartridge (2).
6
Push the staple cartridge into the finisher
until it clicks into place.
7
Close the finisher front cover.
Note
•
If the front cover is not completely closed, a message will appear and the machine remain
paused.
Replacing Staple Cartridge (for Finisher-B1)
When the optional Finisher-B1 is installed and the staple cartridge needs to be
replaced, a message appears on the touch screen. When this message appears, load
a new staple case into the staple cartridge.
Important •
The use of staple cartridges not recommended by Fuji Xerox may degrade quality and
performance. Use only staple cartridges recommended by Fuji Xerox.
Note
•
To order a staple cartridge, contact our Customer Support Center.
