General Settings
65
Co
py
3
1
Select [Dual Color].
2
Select [Target Area Color].
3
Select a color.
[Non-target Area Color] Screen
This screen allows you to select the
color to be used in place of the
colors other than the selected
source colors. You can select from seven preset and six custom options.
For information about how to set custom colors, refer to "6 System Settings" > "Copy Mode Settings" >
"Custom Colors" in the Administration Guide.
1
Select [Dual Color].
2
Select [Non-target Area Color].
3
Select a color.
[Output Color - Color] Screen
This screen allows you to specify
the color to be used for single-color
copying.
Available options are six preset and
six custom options.
For information about how to set custom colors, refer to "6 System Settings" > "Copy Mode Settings" >
"Custom Colors" in the Administrator Guide.
1
Select [Single Color].
2
Select [Color].
3
Select a color.
Original Type (Selecting the Document Type)
This feature is the same as [Original Type] of the [Image Quality] screen. Refer to "Original Type
(Selecting the Document Type)" (P.67).
Copy Output (Specifying Finishing Options)
This feature is the same as [Copy Output] of the [Output Format] screen. Refer to "Copy Output
(Specifying Finishing Options)" (P.106).
