3 Copy
106
Co
py
3
1
Select [Preset Repeat Image].
2
Select any item.
1 Page Up
Disables this feature.
2 Pages Up
Makes two copies of the document image on a single sheet of paper.
4 Pages Up
Makes four copies of the document image on a single sheet of paper.
8 Pages Up
Makes eight copies of the document image on a single sheet of paper.
2 Sided Copying (Making 2 Sided Copies)
This feature is the same as [2 Sided Copying] of the [Layout Adjustment] screen. Refer to "2 Sided
Copying (Making 2 Sided Copies)" (P.83).
Copy Output (Specifying Finishing Options)
This feature allows you to select finishing options.
Note
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
If the offset stacking module is installed, the output position of copies is offset
alternately to separate each set of copies.
If the finisher is installed, each set of copies can be stapled or punched, and then
output.
The output destination is automatically selected depending on the selected feature.
Documents are delivered on the output tray when [Auto] is selected, or on the finisher
tray when [Collated/Stapling/Punching] or [Uncollated] is selected. For the machine
with the C-Finisher with Booklet Maker or Booklet Finisher D2, when [Folding/Stapling]
for [Booklet Creation] or [Bi-Folding] for [Folding] is selected, documents are delivered
on the booklet tray.
1
Select [Copy Output].
2
Select any item.
