6 - 41
6.9 Manual calibration procedure
6.9.1 Manual zero calibration
It is used for zero point adjustment. For
zero calibration gas, suited for an application
VKRXOGEHXVHGDFFRUGLQJWR³6WDQGDUGJDV
LQ6HFWLRQ6DPSOLQJ´
(1) Press the
ZERO
NH\RQWKH0HDVXUHPHQW
VFUHHQWRGLVSOD\WKH0DQXDO=HUR&DOL
-
bration screen.
6HOHFWWKH&KFRPSRQHQWWREHFDOLEUDW
-
ed by pressing the
or
key. After
selection, press the
ENT
key, and zero gas
will be supplied.
:DLWXQWLOWKHLQGLFDWLRQLVVWDELOL]HGZLWK
the zero gas supplied. After the indica-
tion has been stabilized, press the
ENT
NH\=HURFDOLEUDWLRQLQUDQJHVHOHFWHGE\
the cursor is carried out.
Note: For the Ch (component) for
which “AR” is selected in “6.1.1
Setting range switch mode,” the
cursor automatically moves to
the range selected in “Setting
of auto calibration component/
range” (6.2.4), and calibration is
carried out within that range.
ENT
(
)
ENT
To Measurement screen after ex-
ecuting Manual Zero Calibration
・
The analyzer simultaneously calibrate the zero
point of all the channels (components) that have
been set to “at once” in “6.2.2 setting of manual
zero
calibration”.
・
The analyzer simultaneously calibrate the zero
points of both ranges of the channels
(components) set to “both” in “6.2.3 setting of
calibration
range”.
CAUTION
To close the “Zero Calibration” or
cancel this mode midway, press the
key. A previous screen will return.
To close "Zero Calibration"
ESC
ZERO
Measurement Mode
