Fuji Electric PUM Series, Manual

Page: 30 / 77

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
30
5 Cable Diagrams
The following cable diagrams may be different from cable diagrams recommended by Fuji Electric Co.,Ltd.
Please be assured there is no operational problem in applying the cable diagrams shown in this manual.
• The FG pin of the External Device body must be D-class grounded. Refer to your External Device manual for
more details.
• The SG and FG are connected inside the Display. When connecting the External Device to the SG, design
your system to avoid short-circuit loops.
• Connect an isolation unit if the communication is not stable due to noise or other factors.
Cable Diagram 1
Display
(Connection Port)
Cable Notes
GP3000 (COM1)
GP4000
*1
(COM1)
SP5000
*2
(COM1/2)
SP-5B00 (COM1)
ST (COM1)
LT3000 (COM1)
IPC
*3
PC/AT
*1 All GP4000 models except GP-4100 Series and GP-4203T
*2 Except SP-5B00
*3 Only the COM port which can communicate by RS-232C can be used.
)
" „ IPC COM Port" (page 5)
1A Loader connecting cable by Fuji Electric Systems Co., Ltd.
*4
*4 The loader connecting cable differs, depending on the series.
GP-4105 (COM1)
GP-4115T (COM1)
GP-4115T3 (COM1)
1B
User-created cable
+
Loader connecting cable by Fuji Electric Systems Co., Ltd.
*4
Series Loader connecting cable type
PXH ZZPPXH1*TK4H4563
PUM PUMZ*L01