Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
12
External Device Settings
For External Device communication settings, use the SEL key, UP key, DOWN key, Digit selection key, or DISP
key located in the operation area on the front of the controller.
Refer to your External Device manual for details.
1
Press SEL key.
2
Press UP key or DOWN key to display [COM].
3
Press SEL key.
4
Press UP key or DOWN key to display the setting parameter.
5
Press SEL key to switch to setting mode.
6
Press UP key, DOWN key or Digit selection key to display the setting value.
7
Press SEL key.
8
Press DISP key twice.
9
Reboot the External Device.
Setting Value
Setting Parameter
Setting Value
Setup Description
STN4
1
RS-485 station No.
SPD4
384
RS-485 communication speed
BIT4
8o
RS-485 bit format
