Fuji Electric POD UG Series, User Manual

Page: 63 / 75

6
2. Main Menu Screen
6-15
S
im
ple
PO
D
O
pe
ra
tio
ns
Date and Time Setting
1. Move the cursor using the [
←
] / [
→
] switch, and change the value by pressing the [+] / [
−
] switch.
2. When the desired date and time are set, press the [Set] switch to determine the setting.
3. The calendar data is updated as set.
Initializing SRAM
When the SRAM memory or cassette is initialized, the data contained is cleared. Double-check before
initializing the SRAM memory or cassette.
1. Press the [Format] switch and the [Execute] switch.
2. The SRAM area is initialized in the current screen data format. When initialization has been
completed, the message “
∗∗
Format Completed
∗∗
” is displayed.
5. Extension Program Information
When the [Extension] switch on the Main Menu screen is pressed, the following “Extension Prog. Info.”
screen appears.
The driver setting and parameter setting for temperature controller/PLC2Way communication, ladder
transfer function, Modbus slave communication, etc. are displayed.
SYSTEM
F2
F3
F4
F5
F1
POWER