- 4 -
Chaper 1 BEFORE USE
1.1 Acceptance Inspection
• Do not use the product that is damaged or lacking parts.
Otherwise injuries could occur.
Unpack the package and check the following.
(1) The product is the type you ordered. You can check the model printed on the interface card
Model: OPC-VG1-TL
(2) The interface card is not damaged during transportation.
(3) The following accessories are also contained in the package.
- Three screws (M3)
- Three spacers
If you suspect the product is not working properly or if you have any questions about your product, contact the shop
where you bought the product or your local Fuji branch office.
No terminating resistor comes with this interface card.
A pair of resistors with the following specifications must be used: 100 ohm, 1 watt
(The terminating resistors that come with the T-Link module of the MICREX-SX series can be used.)
1.2 External Appearance
OPC-VG1
-TL
T1 T2 SD
N
O
D
A
T
E
EP-4201-
RSW1
RSW2
TB11
2
3
4
5
B
A
50
12
5
3-
Φ
3.6
3-M3
4
0
80
5
40
5
5
TB11
RSW2
CN1
Figure 1.2-1 External Appearance
