- 7 -
2.2 Installing the Interface Card
The interface card should be connected to D-port on the control printed circuit board (control PCB).
Mounting procedure
(1) Mount the interface card so that connector CN1 on the card comes to be connected to connector D-port on the
control PCB.
(2) Secure the interface card with two screws "a" (that come with the option) through holes
and
, then set four
spacers "b" (that come with the option) into holes
to
.
(3) Mount the front cover in the reverse order of removal, referring to Figure 2.1-1 or 2.1-2.
Figure 2.2-1 Mounting the Interface Card
Summary of Contents for OPC-VG1-ESX
