App.1-2
Appendix 1 Unit Handling Procedure
3) Pull the upper cover and the lower case of the unit to the right and left.
Then, the upper cover is removed from the lower case as shown below.
(2) How to mount the upper cover
1) Hold the lower case with the nameplate facing forward and the upper cover with the side having the larger notch up.
Then, mount the upper cover straight on the lower case (you will hear a clicking noise when inserted).
* The right and left notches of the upper cover are different in size.
Notes:
Before mounting/removing the upper cover or handling the printed circuit board, be sure to eliminate static electricity.
