3-3
Section 3 Programming
3-2 System Definition
3-2-1 Registering units
Connect the analog unit on the right of the main unit or the unit that is connected on the right of the main unit.
However, a front board type unit must be connected on the front of the main unit.
<Example of system configuration>
NA3AW03-MR
(Front board type)
NA0AX06-MR
Main unit
<How to register units>
1) Open the system definition screen and register the unit that is connected below the main unit (NA0AX06-MR in this example).
Right-click here.
2) Right-click the main unit and left-click [Insert]. The “Module insert” dialog box opens.
Select “NA0AX06-MR Analog Input 6CH” from the [Outline specification] box and then click the [OK] button. The unit is
registered.
