MT5F22233b
© Fuji Electric Co., Ltd. All rights reserved.
8
Fig.6 Example of press-in process
(a) Set the press-in upper tool and lower tool on
the press machine.
(b) Set the PCB by aligning the PCB hole for
the guide pins with the guide pins of the
lower tool.
(d) Press the module with the recommended
speed and load.
(c) Set the module by aligning the terminals of
the module with the through holes of the
PCB.
2-3-2. Example of press-in process
Fig.6(a)-(d) show the example of press-in process.
Please refer to section 2-3 for the recommended speed and load.
