SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
19
Power On Menus
On power on the following sequence
occurs:
After initialisation, the receiver will start
to search for the signal. The sequence
continue after “Initialising”, and the
receiver will attempt to acquire the
frequency and if no signal is found the
receiver will sweep for the satellite signal
(“Sweeping”).
Once a satellite signal is found “Synch”
will appear when the receiver has
acquired and synchronised with the
signal and has commenced processing
data.
If the receiver has found the frame, but it
is the wrong service ID, this message
will appear (This message sometimes
appears briefly even if the settings are
correct).
Once locked-on, the strength of the
received signal can be seen on the bar
graph. Usually this will be 3-8 ½ bars.
Note : If the mode doesn’t advance to “RECV”, first check that the signal
frequency and symbol rate are set correctly for the uplink in use within
the “Channel Selection” menu, and that the correct satellite is being
tracked.
OmniSTAR LCE
Ver. 02.11017 27Feb 01
Serial No
386069
Group No
0001
Day : 000 Hr : 03
CDT Left
VRC Synch
VRC Recv
FSPAS
Ref.:
B31005102PMBRA0
