3 1/7/2014
Charging your Fugoo Bluetooth Speaker
Checking the battery level
• Press the (Power) button briefly. The LED blinks one to four times to indicate the
charge of the battery.
• If voice prompts are enabled, the speaker responds with "Battery is almost full" or
another indication of how fully charged the battery is.
LED indicator
Voice prompt
Battery level
one blink
Battery is full
100%
two blinks
Battery medium
50%
three blinks
Battery low
25%
four blinks*
Battery needs
recharging
5%
*The LED blinks red when the battery reaches 5%.
Charging your speaker
• Connect one end of the Micro-USB charging cable to the speaker and the other end
to a power outlet.
• The LED indicator blinks green during charging.
• The LED indicator glows steady green once the battery is fully charged.
Turning on your speaker
•
Press and hold the (Power) button to turn the speaker on or off.
• When the speaker is running from battery power, it will turn off after 5 minutes of
inactivity. To turn the speaker back on, press the (Action),
–
(volume down), or
+
(volume up) button.
Connecting your speaker to smartphones and other devices
You can connect to your Fugoo Bluetooth Speaker either through its AUX input jack, or
through a Bluetooth wireless link. Only one of these inputs can be active at a time.
Connecting through an audio cable to the AUX input
• Connect one end of a 3.5 mm audio cable to your Fugoo Bluetooth Speaker's AUX
input jack, then connect the other end to headphones jack of your audio device.
• The LED glows blue and a voice may say, “Disconnected. Bluetooth off. Connected”
• Plugging an audio cable into the speaker's AUX input jack turns off the Bluetooth
wireless link, to save power and maximize battery life.
