Fuel F-57253, User Manual

Page: 32 / 48

32
Step 6:
1. Attach two arms (19) to the arm bracket (15) using 2 axle collars (67) and 4 screws M6x6mm
(114).
2. Attach left and right connect frame (11/12) to upper cross beam (9) using 6 big oil bushings (63), 1
shaft (96), 2 washers 16mm (117) and 2 nuts M16 (122).
3. Attach the press arm (14) to left and right connect frame (11/12) using 6 big oil bushings (63), 1
shaft (96), 2 washers 16mm (117) and 2 nuts M16 (122).
4. Insert the long quick knob (62) through the single hole on press arm (14) to any hole of the
fan-type plate.
5. Insert the foam roller bracket (7) into front support frame (5) using 1 short quick knob (61).
6. Slide 4 leg rollers (42) onto the leg extension frame (6) and foam roller bracket (7) as shown, then
place 4 end caps ø25mm (73) into the tube ends.