background image

1

SAFETY HINTS

IMPORTANT: THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY

SAFETY PRECAUTIONS

Thank you for purchasing our product.  Even though we go to great efforts to ensure the quality of each product, 
occasional errors and/or omissions do occur.  In any event should you find this product to be defective or 
missing a part please contact our Customer Service Department.

Your treadmill was designed and built for optimum safety.  However, certain precautions apply
whenever you use your treadmill. Be sure to read the manual before assembly and operation. 
Also, please note the following safety precautions:

DANGER:

  

To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet 

immediately after using and before cleaning.

1. Read OWNER OPERATING MANUAL and all accompanying literature and follow it carefully before using 

your treadmill.

2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, 

STOP the workout at once.  CONSULT A PHYSICIAN IMMEDIATELY.

3. Never leave the treadmill unattended when plugged in.  Unplug from the outlet when not in use and before 

removing or replacing parts.

4. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has been 

dropped, damaged, or exposed to water.

5. Do not pull the treadmill by the power supply cord or use cord as a handle.  Keep cord away from heated 

surfaces and open flames.

6. Fitness equipment must always be installed and used on a flat surface.  Do not use outdoors or near water.
7. Do not insert any objects into any openings.
8. Keep children and pets away from this equipment at all times while exercising.
9. Handicapped individuals should have medical approval and close supervision when using this treadmill.
10.Do not place hands or feet under the treadmill. Always keep hands and legs off of the treadmill when others 

are using it.

11.Never turn on treadmill while standing on treadbelt.  Always return the treadmill to slow speed to provide for 

safe dismount and low speed restart.

a-To disconnect, turn all controls to the off position, then remove plug from outlet. 
b-Use the treadmill only for it is intended use as described in this manual.
c-Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your 

heart rate to gradually increase and decrease and will help prevent straining muscles.

d-Never hold your breath while exercising.  Breathing should remain at a normal rate in conjunction with the 

level of exercise being performed.

e-Start your program slowly and very gradually increase your speed and distance. 
f-Always wear suitable clothing and footwear while exercising.  Do not wear loose fitting clothing
   that could become entangled with the moving parts of your treadmill.
g-Do not walk or jog barefoot, in stocking feet or loose fitting shoes or slippers.
h-Care must be taken when lifting or moving the equipment, so as not to injure your back. Always use proper 

lifting techniques.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

13. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have been given supervision or instruction

14. Children being supervised not to play with the appliance

WARNING:

Before beginning any exercise program consult your physician. This is especially important for 

individuals over the age of 35 or persons with pre-existing health problems.  Read all instructions before using 
any fitness equipment.  We assume no responsibility from personal injury or property damage sustained by or 
through the use of this product.

CAUTION!! Please be careful when opening this unit.

Summary of Contents for 16




















Reviews: