9 / 34
ba_7-1-120/11E/0318
4.2 Mechanical installation
The intended installation of the Weather Station FS6003 requires the use of a pipe socket / pipe
with an
outside diameter of ≤25mm
. The
inside diameter must be ≥19mm
to admit the
connector and cable.
Tool:
Hexagon socket wrench SW2mm
(socket wrench).
Procedure:
1. Push cable/plug connection
through the bore hole of the mast,
tube, bracket etc.
2. Put FS6003 on mast, tube.
3. Align FS6003
to “north”.
(
Procedure see chapter 4.2.1
).
4. Secure FS6003 by the M4-
hexagon socket screw.
Attention:
The hexagon
socket screw
is to be
tightened by
max. 0.6Nm.
When using the
mounting angel
(see chapter
accessories) the
guide angles
must be
removed
, see fig.
The mounting angle is not included in
delivery.
Remark:
Tube and mounting angle are not included in delivery.
