DAY signal will begin to blink. Press the “M” button to change the DAY. Each time when
you press the “M” button, it will change one DAY forward. Don't keep on clicking on the
'SET' button without being released during programming.
REPEAT THIS PROCESS FOR SETTING THE TIME
.
Use the “SET” button to change (Hours/Minutes) and the “M” button will change the
numbers forward .
See Figure 5.
After you change the batteries, you have to readjust the date and time. Time is
maintained using a 24 HOUR clock. AM/PM is not displayed.
NOTE:
WHEN EVERYTHING IS SET-UP COMPLETELY, THE MONITOR WILL AUTOMATICALLY SWITCH OFF.
BUT, WHEN YOU PRESS “ON/OFF” BUTTON AGAIN, THE MONITOR WILL ACTIVATE.
Figure 5
For the unit change, you can select the mmHg or Kpa; and the mmHg is the definition
unit.
When the machine is turned off, press the button “ON/OFF” more than about 10 seconds
till LCD blinks, then press Memory button to switch between mmHg and Kpa .
Wrist Cuff Connecting
★
Place the cuff around your left bare wrist ½” - ¾” above the wrist joint on the
opened-hand (inside) side of the wrist.
★
Keep the cuff at approximately the same level as your heart. Do not inflate before
