© by WilTec Wildanger Technik GmbH
Item 62841
Page 6
http://www.fudajo.com
06 2022-1
1.
Slide the tubes
(1)
into the tubes
(2).
Then start assembling the lower frame by putting together
the bent parts and to keep them ready for further assembly. Keep the vertical tubes ready; they
will hold the upper frame.
2.
Put the tubes together that will form the upper frame of the dog enclosure, then loosely attach
the fasteners for the middle vertical tubes. — Note that 2 persons are required to do the next
steps!
3.
Pick up the upper frame assembled and put it onto the vertical tubes. Then fix the four vertical
corner tubes to the upper and lower frame by using the fasteners; secure them with a socket
wrench.
Step
3: installing the door into the frame
1.
Fix the door to the frame using the door hinges and the set of large screws. Then fix the safety
lock.
2.
Attach the wire mesh to the door on the upper and lower parts using the wire tie.
3.
Using a cordless screwdriver, insert the self-tapping screws into the corresponding pilot holes
of the tubes and tighten them. This will help to stabilise the enclosure additionally.
Step
4: attaching the wire mesh
