© by WilTec Wildanger Technik GmbH
Item 62841
Page 5
http://www.fudajo.com
06 2022-1
Assembly
Step
1: assembling the door
1.
Use the two fasteners to fix both ends of the C tube and secure the
fasteners with 2 screws (M8×50
mm).
2.
Then slide the B tube into the A tube.
3.
After assembling the U-shaped frame, slide the ends of the A and
B tube into the ends of the C tube.
4.
To attach the wire mesh to the door frame, proceed as follows:
o
Place the two round rods in the position shown in the illus-
tration.
o
Then put one of the rods through the loops on the side of
the wire mesh. Put the other round rod through the loops
on the other side of the wire mesh.
o
Then attach the round bars to the tubes using 4 pairs of
hooks.
5.
Finally, use the wire tie to fix the wire mesh to the door frame and
add strength and stability to the door.
Note!
Loosen the two frame fasteners to be able to align the elements accurately.
Step
2: assembling the frame
Note!
The door is designed to be mounted to the left side of a corner.
