Fubag 8213790KQA105, Operator'S Manual

Page: 12 / 20

www.fubag.ru
O m perator's anual
- - 11
6. Maintenance
-
-
.
-
-
.
-
.
-
and filter (fig/ 15C)
- 15
-
The service life of the machine depends on maintenance quality.
BEFORE CARRYING OUT ANY OPERATION, ALWAYS PULL OUT THE PLUG AND DRAIN THE
RECEIVER COMPLETELY (fig 10-11)
Tighten the tie-bolts of the head at start-up and after the first hour of work (torque 10 Nm = 1.02
Kgm).
After loosening any safety screws (fig. 12a), clean the intake filter according to the type of working
environment and at least every 100 hours (fig 12b-12c). If necessary, replace the filter element
(clogging of the filter reduces compressor performance and an inefficient filter causes increased
wear).
eplace the oil after the first 100 hours of operation and every 300 hours
subsequently (fig 13a-13b-13c). Remember to check the oil level at regular intervals.
Periodically (or after working with the compressor for more than an hour), drain the condensate
that forms inside the receiver (fig. 11) . This protects the receiver from corrosion
and does not restrict its capacity.
Regularly clean and dry the filter (fig. A , 4) and the pneumatic tool air inlet opening.
Should the pneumatic tool not be used for an extended period of time, it is recommended to store it
in a clean and dry place, to remove any residual and to lubricate it.
* .
In lubricated models r
only lubricated models - Air Master Kit, Hobby Master Kit, Auto Master Kit
www.fubag.ru