Fuba
2 Product Description
2.1 Front Panel
1.
LED Indicators
: SIGNAL led shows the presence of antenna signal.
2.
Display
: 7-segment 4-digit display, it shows the channel number if the decoder is in operative mode or the
current time if the decoder is in standby mode.
NOTE
In standby mode the display brightness is low while in operative mode the display brigthness is high.
3.
IR Receiver
: Infrared IR Receiver for remote control unit
4.
Physical Keyboard
:
a. The keys CH
º
, CH
»
, VOL
¶
, VOL
·
allow to move among menu items and select values. Moreover CH
º
and CH
»
can tune to a different channel and VOL
¶
and VOL
·
can increase/decrease the volume
b. The Power button allows to change decoder status (operative or standby mode)
c. The OK button confirms the selection
d. The Menu button open/close main menu
5.
USB Port
: USB port for upgrading software version, recording (PVR) and playing multimedia contents
6.
CI/CI+ Slot
: slot for CI/CI+ modules
2.2 Rear Panel
1.
Composit Out
: yellow connector for video and red/white connector for audio
2.
Coaxial Digital Audio Out
: black connector
3.
TV SCART Out
: SCART output for TV connection at standard definition
4.
TV HDMI Out
: HDMI output for TV connection at high definition
5.
USB port
: USB port for upgrading software version, recording (PVR) and playing multimedia contents
6.
LOOP OUT
: Antenna signal loop through output for another receiver
7.
LNB IN
: Parabolic antenna input
8.
Hard Switch
: Switch for power on/off the receiver
9.
Power Supply Cable
: Mains lead for connection to mains power socket
3
