English
ODE707
3
2. Product description and connections
2.1 Front panel
1.
ON
LED indicator of active status.
2.
STANDBY
LED indicator of Stand-by status.
3.
IR
Infrared sensor for remote control.
4.
CNANNEL
▼
Previous channel button.
5.
CHANNEL
▲
Next channel button.
6.
ON / Stand-by button.
2.2 Back panel and connections
CAUTION
It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna before
plugging in the mains lead. When the receiver is powered electrical voltage differences may be created when
plugging in the jacks, which may generate currents that could damage the appliances.
The direct TV SCART connection should always be used as a first operating test, since other more complex
connection sequences may give malfunctions that are not caused by faults or defects of the actual appliances but by
problems of incompatibility.
1.
RF IN
Antenna input.
2.
TO TV - LOOP OUT
Antenna TV loop through output.
INFORMATION
If the Antenna Loop Output is not used, it’s possible to disable it, switching off the parameter
Tuner Loop
on menu
Installation
-
Tuner Setting
.
3.
TV SCART
TV SCART connection.
4.
VCR SCART
Video recorder SCART connection.
CAUTION
If the VCR SCART socket is not used for recording, but as an input to pass through the audio/video signal of an external
device to TV screen, it’s necessary to enable the item
VCR SCART Input
on menu
System
-
TV System
.
5.
SPDIF - COAXIAL
Digital Audio output for home-theatre amplifier.
6.
RS232
Serial port RS232.
7.
DC IN
5V
1A input for the connection of the power adaptor to the
power socket
230V~ 50Hz.
