Assembly Instructions
Your electric bike is shipped 85% assembled.
Follow these steps to get it ready and safe for you
r
first
ride.
To Prepare
We recommend that you
familiarize
yourself with
the bike parts before assembling. Gather all
required tools. Be sure to work in a clean, dry space
with plenty of room. You might wish to lay down a
tarpaulin or old blanket to protect the bike during
assembly. You may find it helpful to stand the bike
frame on a block or sturdy box under the battery
housing to work with it in an upright position. Please
watch the balance when installing wheels.
Do not activate the brakes until the bike is fully
assembled. Squeezing brake levers while
calipers have no disc rotor between them can
damage the brakes.
Carefully lift the electric bike out from the carton (two
people recommended for this task). Cut the nylon zip
ties with suitable scissors and remove the foam
protection from the bike.
1
.
Unpack
2
.
Handlebar and Stem
Loosen the handle bar angle the four handlebar clamp
bolts and rotate the handlebar to make sure the brake
lever, shift lever and switch positions are at the correct
angle. Finally fasten the angle adjusting bolt to 5-8N.M