Maintenance & Adjustment
1. Gear Adjustment
Adjust the rear derailleur cable tension to align guide
pulley with the centre of the cogs (setting this in gear 3
or 4 is easiest). Low adjustment: In 1st gear check and
if necessary, turn the L adjustment screw so that the
guide pulley moves to a position directly in line with the
largest (1st gear) sprocket. High adjustment: turn the
crank arm while gear shifting the derailleur to move the
derailleur to the top gear position, and then check and
if necessary, turn the H adjustment screw to adjust so
that the guide pulley is in line with the outer line of the
smallest sprocket when looking from the rear.
Turn the crank arm to set the derailleur to the low
position.
H adjustment screw
L adjustment screw
Warm soapy water and a cloth can be used to clean
the frame of your bike, but care must be taken not to
immerse any of the electrical components; they are
rainproof but cannot be immersed in water. The motor
can be cleaned with a soapy cloth, but also must not
be immersed in water. The battery can be cleaned with
a damp cloth, then dried afterwards. Note: in salty
conditions it is essential to clean and lube your bike
regularly.
2. Cleaning your electric bike
3.Lubrication
1.1 Once a month lubricate all pivot points on your
derailleur and the derailleur pulleys with suitable
chain lube.
1.2 Every three months lubricate the brake lever
pivots, gears and chain with suitable oil.