9
Version 1.0
© FTEmaximal
The following steps assume, that ...
... the receiver is properly set up.
Important:
Unplug the receiver if you wish to carry out connection tasks.
Connection ...
... for connecting your receiver to the antenna you need a long coaxial cable suitable for
digital reception (for example, FTE K 290). If the F connectors are not mounted into the
connecting cables yet, please proceed to mount the connector as follows:
Please connect the F connector from antenna, to connection
1
of the back side of the
receiver. Install the small
connecting cable
between the connectors
10
and
2
.
Indoor antenna will be supported by
IRD 420T/SM
on connector
3
.
To use 5V , you need a DC injector. It will be placed between connector 1 and the F
connector of the coaxial cable.
Connecting television receiver and video tape recorder
You will achieve an optimal transmission quality if you connect the television receiver and
the video tape recorder with an Scart-cable using the corresponding socket of the
receiver.
a) Use a scart cable
A single scart-cable is enough for the connection to the TV set.
b) About the antenna cable
Here you can also combine the terrestrial receiver with your TV set or video tape recorder.
However, the transmission quality is a little poorer.
First steps
The installation
4.1
