36
Version 1.0
© FTEmaximal
In case of problems with the receiver, and before further search, check first that ...
... the receiver’s set up has been carried out accordingly to the instructions of this
manual and that the connections are accurate.
...
the
satellite
antenna
conforms to the requirements of the installation, is well
mounted and aligned.
Without these two requisites, the following troubleshooting guide cannot lead to success.
In the case that the problem persists, please refer to your authorized local dealer... He will
help you with pleasure!
The receiver’s leds do not light up, and there is a malfunction ...
a) Is the power plug properly connected?
Check that there is a good contact and that the plug is firmly seated in its socket.
a)
Is the main power switch on the receiver’s back in the
<On>
position?
b)
Is the socket / house protection functional?
Connect another device (for example, a radio) to the same socket and check it
works.
d)
Is the power cord damaged?
Pull the power plug off the socket under the greatest caution !
Only a specialist may repair this damage !
There is no picture, no audio, or bad quality
a)
Check that the combination between the receiver and the TV set and the antenna is
correct. Check the connections to the TV set and to the antenna as well.
b)
Is the satellite antenna optimally aligned?
The receiver shows, at the
INFO
menu, whether the signal level is weak or enough.
Please, refer also to the installation guide of your satellite antenna.
If problems persist, please, ask a specialist.
c) How mucho strong is the DVB-T signal in your zone?
It is possible that you need a bigger antenna.
Ask to your dealer what antenna do you need.
d) Have you pressed the
MUTE
button?
Please, press this same button in order to restore the audio.
f) Does the picture flicker or colour is gone?
Please, refer to chapter
System Menu>System Setting
and check the values
corresponding to
TV System
,
RF System
and
Scart output
.
Self help
Troubleshooting
7.1
